Powered To Offer You
Nothing But The Best.

Every facility of RTS’ is powered up with every facility needed to churn out top-of-the-line-products in the power arena. Each and every product is subjected to stringent quality standards. And, by having everything right from slitting, cutting and annealing to tank fabrication, core assembly, winding, and assembling facility at each and every factory; RTS ensures minimal external dependency along with an assurance of paramount quality.

Unit 1Transformer & Cable Facility

C-174 VKI Area, Jaipur, Rajasthan.

  • Manufacture of Distribution Transformers upto 1000Kva.
  • Manufacture of Wound Core Single/Three Phase Transformers.
  • Manufacture of Conductor: AAC, AAAC, ACSR.
  • Manufacture of XLPE/PVC Insulated LT Cables upto 1.1000 KV.
  • Manufacture of Aerial Bunch Cables and Single & Multi Core.
  • Manufacture of House Wiring Cables (PVC ) FR & FRLS.
  • Manufacture of Railway Signaling Cables.
  • Total area about 13500 Sq Mtrs.
  • Covered area 60000 Sq Ft.

Unit 2EHV Transformer Facility

16, VKI Area, Jaipur, Rajasthan.

  • Manufacture of Power Transformers upto 55 MVA, 132 KV.
  • Covered area 20000 Sq Ft.
  • Total area about 6500 Sq Mtrs.

Unit 3Distribution Transformer Facility

Udyog Vihar, Jetpura, Rajasthan.

  • Manufacture of Distribution Transformers upto 1000Kva.
  • Manufacture of Three Phase Transformers.
  • Total area about 8000 Metre.
  • Covered area 30300 Sq Ft.

Unit 4Power & Distribution Transformer Facility

Mathura Road, Agra, Uttar Pradesh.

  • Manufacture of Power & Distribution Transformers upto  10 MVA, 33 KV.
  • Repairing, refurbishing and servicing of Transformers upto 20 MVA, 33 KV.
  • Total area about 3650 Sq Mtrs.

Unit 5Power & Distribution Transformer Facility

Dhulagarh, Howrah, West Bengal.

  • Manufacture of Power & Distribution Transformers upto  25 Mva, 33 KV.
  • Covered area 60000 Sq Ft.
  • Total area about 19445 Sq Mtrs.

Unit 6Galvanised Steel Wire Facility

Sikar, Rajasthan.

  • Production capacity, 1500 – 2000 Ton of GI Wire & Strip.
  • Total area about 8280 Metre.
  • Covered area- 54000 Sq Ft.

Unit 7Wind Power Facility

Dhule, Maharashtra

  • Generating capacity 1.25 MW.

Unit 8Wind Power Facility

Barmer, Rajasthan

  • Generating capacity 0.60 MW.

In-House Testing Facilities

RTS Power is equipped with state-of-the-art testing laboratories and a test turf built to befit not just Indian but also international standards. To emphasize its seriousness in upholding standards every transformer that leaves the RTS floor is given an OK by NABL accredited third-party laboratories like CPRI & ERDA. RTS’ testing facility houses:

  • Temperature Rise
  • Partial Discharge
  • Noise Level
  • Harmonics
  • No Load Loss
  • Load Loss
  • Impedance
  • Ratio Winding Resistance
  • Megger
  • DVDF
  • High Voltage

In addition, all RTS transformers are tested at NABL accredited third-party laboratories, such as CPRI, ERDA & KEMA Netherland.

Our Certifications

All RTS products manufactured follow relevant BIS and IEC standards. All 6 RTS Manufacturing units are ISO 9001 certified. RTS is approved by several prestigious organizatons such as Military Engineer Services (MES); Research Design and Standards Organization (RDSO), National Thermal Power Corporation (NTPC), Power Grid Corporation of India (PGCIL), Bureau of Energy Efficiency (BEE), Bureau of Indian Stanndards (BIS) among others. Our products are routinely type tested at third party laboratories in India and abroad, such as CPRI, ERDA and KEMA, Netherlands. RTS is a member of industry associations suc as CII, IEEMA and EEPC.